Electronic circuit board repair by Baytron Ltd., Richmond VA

 

Sorry,  we apologise but we are closed for the entire month of November, re open Dec 1

 

 

 



 

Electronic Printed Circuit Board Repair 

YES, we can fix it. Reasonable Price. Quick Turnaround. If, for any reason, we are unable to repair it, we do not charge..... NO FIX, NO FEE  except for a basic bench fee as outlined below.

 TO FACILITATE RETURN TO YOU. PLEASE INCLUDE A CHECK FOR $25, PAYABLE TO BAYTRON, LTD.  IN THE UNHAPPY EVENT THAT YOUR ITEM IS UNREPAIRABLE, THIS CHARGE WILL COVER A BASIC BENCH FEE, AND ALSO THE COST OF RETURNING IT TO YOU.  OTHERWISE, IT WILL BE APPLIED TO YOUR FINAL BILL.

Contact us at 804-920-3585        or email to      adrian@baytronltd.com

PLEASE NOTE, WE DO NOT DO ANYTHING WITH TELEVISIONS.... Except watch them, mainly Fox News, Fox Business, and the Weather Channel....with the sound muted of course, not interested in the news which is usually bad....... just wanna  look at the women.... Fox News most definitely has the best line up....... even the guys on the loony left  watch that channel.... they aint that loony......                                       

Not the best website you have ever visited, but for the most part, it does the job, and it didn't cost the long suffering taxpayer close to one billion dollars, and counting....

The repair of printed circuit boards is our only business, and we handle many different types. For some we are in possession of the original manufacturer's schematics, but in cases where it is not been possible to obtain information we are able to "reverse engineer" the circuit, making our own drawing from the board itself. However, if our customer is able to send us a schematic with the board, then that is a great help, reflected in both the turnaround time, and the cost.

Baytron Ltd. has been in business for about 31 years (since '83 when I got kicked out of my nice comfy yuppie job) years during which time we have acquired specific knowledge in several distinct areas, as outlined below.

ARKGATE SELF STORAGE FACILITY GATE CONTROLLER, manufactured by ARK AUTOMATIC GATE SYSTEMS INC. This company is now out of business and we are probably the only source of repair in the US for this pc board. About $120

ARK GATE REPLACEMENT. ..... TO DESIGN A BOARD TO REPLACE THIS OBSOLETE, AND IRREPLACABLE BOARD WOULD INVOLVE AN INVESTMENT OF SEVERAL THOUSAND BUCKS.  NO SINGLE INDIVIDUAL IS GOING TO GO FOR THIS, BUT IF ENOUGH OF THESE GATE OWNERS COULD GET TOGETHER IT WOULD BE FEASIBLE TO DO THIS AT A REASONABLE PRICE.  SUCH A REPLACEMENT WOULD BE EASILY AND CHEAPLY SERVICEABLE, AND WOULD PERMANENTLY SOLVE THIS PROBLEM.  CALL AND LEAVE YOUR NAME AND MAYBE ENOUGH PEOPLE WOULD BE INTERESTED TO BRING THE PRICE DOWN.

MUNCHKIN BOILER 80M PC BOARD, CONTROLLER

KNIGHT MPL-1000 PLUS TIMER as used in industrial laundry equipment. About $130

DM SPRING GAGE, MANUFACTURED BY DM ASSOCIATES, GENOA, ILLINOIS, We are probably the only source of repair for these gauges. About $250.

CURTIS DC MOTOR DRIVER PC BOARDS. These boards seem to pop up everywhere, golf carts, scooters, anywhere there is a motor and a battery, usually 24v. We can fix 'em for about $120.

PELLET STOVE PC BOARD CONTROLLERS.  Done some of these successfully, haven't done all of them, but maybe we can fix yours.  Cost somewhere around $100. Tht three years are going to be somewhat chilly..... especially as the coal industry has suffered  it's own Benghazi....

GE electronic oven control module, and some other brands.. If your electronic oven controller has failed, and GE no longer sells it, no need to buy a new oven. We can repair it for around $130. One other thing, if your are replacing your oven for some other reason, kitchen remodelling for example, it might be a good idea to hang onto the electronic circuit boards, because there is always someone looking for them.  Right now I have a customer looking for an obsolete Kitchenaid controller.

WINE ENTHUSIAST, VINOTEMP,  RED BULL,  and other wine cooler repair electronic controller power supply pc board. Don't risk ruining the bouquet of your priceless collection of Chateau de Pisse,  2013 (July maybe??). We can fix that board for $80, plus shipping.

AMERICAN INCUBATOR. There seems to be no repair service anywhere for the control box for this incubator, except us. This is no yolk. About $150

Photographic equipment, various, including Hope products.

Beseler Dichro 45 Enlarger Head.

Beseler no longer provides a repair service for this instrument. We do have the capability to repair them, at a price of around $220, or very much less if you can remove the pc boards yourself and send them to us. This will also save substantially on the shipping cost.

Further to the above, we are now able to offer a REPLACEMENT CONTROL BOARD for the Dichro 45 which uses modern chips, thus solving the problem of the obsolete and unobtainable devices used at present. This new board also has it's own SELF CONTAINED TIMER 0.1-999.9 secs in 0.1 sec. increments. So, if your Dichro 45 is dead, we can resurrect it, thus saving a couple of grand in replacement cost.

We also have numerous obsolete spare parts for the Dichro 45 lying around here somewhere

HVAC, Air Conditioner Heat Pump / PC control boards. York, Singer, Galt, Envirotech, McQuay, and others. Every summer lightning zaps thousands of 'em, and your A/C repair man will tell you that they cannot be repaired. We do it. Usually $120 although the more complex units may be higher than this. Much cheaper than replacing the entire system if the circuit board is obsolete.

Industrial battery charger control boards, Exide single and three phase [$120], Hertner Start/Stop, [$120], and others.

Additionally, we have available our own BATTERY CHARGER CONTROLLER designed by Baytron Ltd. to convert old, timer operated ferro-resonant chargers to fully automatic operation at a cost of approximately $200. This pc board provides a choice of six delayed start times, continuous monitoring of battery voltage, with provisions for shut-down as deemed appropriate, all shut down causes being identified by a flashing LED code. If you don't have the time to consult the handbook for flashing LED code, then maybe you need our TALKING CHARGER CONTROLLER which will actually tell you in plain English (or Espanol) why the charge was terminated, and if there was a problem it will tell you what is was. Call or e-mail us for details.

Electric Scooter controllers, Rascal, [$120-$150], and others.

Specific knowledge of some of the older generation of Molins tobacco machinery, for example, Mk 9 and Mk 10 cigarette makers, Mk 16 TFU, OSCAR, POLAR, CID, etc. These must be getting pretty ancient now.

Oxygen Concentrator machines, as used in a home environment, are controlled by an electronic printed circuit board. We are able to offer a reliable repair service for most manufacturers types, Invacare, Puritan Bennett, Airsep, Aeris, Alliance, and many lesser known brands. Prices range from $40 to $100. Enquiries from dealers are welcomed.

Hill-Rolm hospital bed control boards.....we repair these pc boards

Collator machines C.P.Bourg machinery.  We repair some older CP Bourg pc boards, examples.... PC 109, PC 105,  PC 110, etc. Haven't done all of them, but willing to try anything new.

If you have an electronic problem we can usually provide the solution.........give us a call..............804-920-3585,     or e-mail us          adrian@baytronltd.com

hafa gr8 day.........

 

Yard Sale.... or....Stuff we would like to get rid of....

Baytron Ltd. is not primarily a vendor of electronic components, but obviously we maintain a broad inventory as demanded by the nature of our business. So if you have a need for a transistor, diode, resistor, integrated circuit etc. we are willing to sell components in small quantities.

We currently possess some items that we would like to sell, as follows;

Several dozen MOSFET transistors, 500v, 12A, $3 ea.

Approx. 1000 SP4541 prescalers, divide by 256,   75 to 1200MHz, will consider any reasonable offer.....[maybe even an unreasonable offer].....

One CATV modulator, Commander IV, output ch. 21H, make offer... or maybe a museum would like it....

Relays, 130 of 'em, American Zettler JW1FSN-DC 5v SPDT, contacts 10A @ 250v, pc board mount, $2.00 each, or $200.00 for the lot.

We also have a small inventory of an obsolete microprocessor chip, MK38P70, MK97501R-00, manufactured by MOSTEK. (this is the "piggyback chip") which might interest somebody.

Another obsolete chip gathering dust here is HD63B01Y0P, manufacturer HITACHI.

Not interested? That's OK, but watch this space in the future....

May we all Live Long and Prosper........ although right now the prospects seem a bit gloomy...


This is Our World........
Description:                               FORWARD!!!!.... er.... wot's that???

Lean Forward............ and fall flat on your face...... 



Description:......... All lemmings line up on the left.........

Word for the future......let's look ahead...              NOBAMA


 



HOME | CONTACTS | FEEDBACK FORM
 

Baytron Ltd.
 , ,   
Phone: 804-920-3585